If you are working from home and you do not know what to do after your computer shows the “WiFi Connected But No Internet” error, you are not alone. Almost everyone faced this in the last three years, and few of them have found a solution to that.
In this article, you will find those solutions amazingly explained so that you can fix the issue forever. But, first, you need to know what signals this issue in your computer and what results in this error. So let’s discuss that:
Common errors in Windows Computer Regarding WiFi
You need to check if the issue is really with your WiFi. The reason could be something else that results in no internet access. For example, if your computer shows the following errors, it confirms the real reason is WiFi internet.
On Windows PCs, a small yellow warning triangle with a black exclamation mark shows, whereas a black exclamation mark appears on Android and iPhone smartphones. After that, one of the following error messages appears:
- WiFi is available, but there is no internet access.
- There is no Internet access via WiFi.
- Therefore, there is no access to the internet.
- The device is connected, but no internet access.
What Provokes The Error & What Will You See?
It is challenging to tell one reason behind any error on a windows computer because it may vary in each case. Therefore TechNinjaPro has gathered a few reasons that caused this issue in some windows users in the past.
When you encounter this issue on your computer, it means that your device is linked to the local network, but that access to the internet is restricted. Some of the most common causes are as follows:
- First, the WiFi adapter on your PC is broken.
- Your internet service provider is currently unavailable.
- Your computer’s internet protocol address is wrong (IP).
- Access is being denied due to security software (antivirus).
- The wireless drivers on your computer are out of the current.
- The DNS server settings on your computer are incorrect.
- Your DNS cache has been tampered with.
- Your router isn’t working correctly.
- And last is that your computer’s WiFi mode is out of date.
How to Fix WiFi Connected But No Internet Error?
Before you start applying any fix on your device, you must first verify whether the “WiFi connected but no internet” error is affecting only the device you are using or the entire local network.
This will assist you in determining the most likely cause and subsequently the best way for resolving the issue.
Issue With The Device
If your computer is the only device that suggests it has a connection but no actual internet, you most likely have a misconfigured setting, malfunctioning drivers or WiFi adapter, DNS difficulties, or a problem with your IP address.
Issue With All Devices
If all devices on the network have this WiFi connection but no internet access error, it’s likely that your router/modem is malfunctioning or that your internet service provider is offline.
Further in the article, you will find the solution to fix the issue in both of these cases. For instance, even if your computer is showing this error on a single computer or it is a network-wide issue, in both cases these solutions are the best.
1. Flush DNS
While your computer works fine on other networks but not on this one, then that means the issue is with the network. You may fairly presume that it is not a driver-related issue. The most prevalent issue is one with the DNS server. The Domain Name System (DNS) is in charge of translating domain names into IP addresses.
Follow the steps to Flush DNS:
- Search cmd in the Start menu, and run Command Prompt as administrator.
- Press enter after typing the ipconfig /flushdns command.
- It will complete the Flushing DNS cache process.
This process clears your device of all known DNS addresses. After this, your computer will ask the correct DNS server for a new (and correct) address. It’s common to just see the dialogue window for a small period (or even not at all).
What we just did is flushing the DNS cache. This removes all known DNS addresses from your device. This way your computer will request a new (and correct) address from the correct DNS server. Normally, you will only see the dialogue box for a brief moment.
2. Use Windows Network Troubleshooter
Another built-in tool that you can use to solve the issue with the network is Windows Network Troubleshooter. Windows Network Troubleshooter is one of the first things to try. This could be able to solve the issue immediately.
- Open Settings from the Start menu.
- Select Network & Internet from the Setting window.
- Click on the Status option from the left-hand menu.
- Tap on Network troubleshooter from the net menu.
- Follow the steps accordingly and test it to see if it fixes the issue.
3. Set a Fixed DNS Server
The majority of issues are DNS server-related; if flushing the DNS cache fails, we can try setting a fixed DNS server. When you join a network, the router usually instructs your device on which DNS server to use. By making a DNS server static, we tell our computer to use that server all of the time.
This is a safe setting to change. You can still connect to the internet on other networks once you’ve configured a static DNS server.
- Open Settings from the Start menu, and open Network and Internet.
- Select Change Adapter Options from the Network and Internet.
- Double-click the WiFi Adapter to open your Network Adapter.
- Choose Properties.
- Then choose Internet Protocol Version 4 (TCP/IPv4) and go to its Properties.
- Check the Use the following DNS-Server option.
- 8.8.8.8 is the preferred DNS-Server, and 8.8.4.4 is the alternate DNS-Server.
- Close all windows by clicking OK.
After the process, check your internet connection if the issue is resolved. The IP address 8.8.8.8 and the alternative DNS-Server address are the Google DNS server’s IP addresses. These are some of the world’s fastest DNS servers.
4. Check Internet Service Provider
Commonly, the WiFi is connected but no internet issue arises due to the internet service provider. To make sure that it could be an issue with your ISP check if you are experiencing a similar problem on all the devices connected to the same connection.
In the case, the service provider is down, all you can do is to contact your ISP, and until that use another internet connection.
5. Reset Router
Sometimes only restarting the device can save a lot of your time. Just like that restarting your router can also solve the internet issue, all you have to do is, turn it off and unhook it from the wall. Plug it back in and turn it on after roughly a minute.
If you have a router and a modem, turn them off and unplug them both. After around 30 seconds, plug in the modem, then wait for another minute before turning on the router. 5-10 minutes after everything has completed charging up, test your devices again to see whether the problem has been rectified.
6. Fast Startup
The “WiFi Connected But No Internet” error can be caused due to the Fast Startup. The Fast Startup feature shuts down and powers on your computer quicker.
Follow the steps given to disable the Fast Startup:
- Tap the Windows Key + R to bring up the Run dialogue box. Type powercfg.cpl and push enter.
- This will take you to the Power options window.
- Select the Choose what power buttons do option on the left-hand side.
- Tap on change settings currently unavailable from the define section.
- You’ll find a fast startup option under the shutdown settings section.
- Uncheck the option for a Fast Startup and click Save.
Once you are done, Restart your computer to check if the internet access issue is resolved.
7. Update Network Adapter Driver
Drivers are an essential part of any Windows computer. And keeping your PC’s driver updated regularly is very important. An out-of-date network adapter driver may cause a communication issue between the router and the computer.
Follow the steps below to update your driver:
- Type Device Manager in Start search and open it.
- Expand the section Network Adapters from the list.
- Right-click on the wireless option and select update the driver.
- A new window will pop up. Select the Automatically update driver.
If the process of updating the drivers from the settings is lengthy and challenging, TechNinjaPro has another solution to update drivers automatically.
Update Drivers Automatically using a Third-Part Tool and Remove the Hassle Once and For ALL
Driver Booster will scan your computer for outdated and faulty drivers and update them automatically. Follow the steps given below to get started with Driver Booster.
- Get Driver Booster, install, and run it.
- In the Driver Booster app, click on the Scan button.
Driver Booster will then scan the computer for Corrupted, missing, and outdated drivers. At the end of the Scan, it will show you a list of drivers that require downloading or updating.
- Find the network and graphics driver and click on the Update button.
- You can also click on the Update Now option at the top to download all the drivers at once.
Driver Booster will update the drivers for you. After the process is done, restart your computer and check if the issue is resolved. (Read the complete Review of Driver Booster Pro)
8. Check IP Address
The WiFi Connected But No Internet error could be caused due to the incorrect IP address of your computer. TechNinjaPro will tell you how you can correct this.
- Right-click the network icon in your taskbar in the bottom right-hand corner of your screen and choose Open Network & Internet Settings.
- Double-click your network after clicking Change Adapter Options.
- Double-click on your joined internet connection (WiFi or Ethernet) and select Properties.
- Locate the entry labelled Internet Protocol Version 4, select it, and click on Properties.
- Make sure that both your IP Address and DNS Server Address are set to obtain automatically instead of manual configuration. Afterwards click on OK and try to connect to your internet again.
9. Disable Conflicting Applications
It is being reported by many windows users that they experience this not internet access issue due to the conflicting apps. If your computer has third-party antivirus software installed, disable it to see if the problem goes away.
Follow the steps below to disable the antivirus:
- Open the Control Panel app by typing it into the Start search bar.
- Go to System and Security in the Control Panel window.
- Select Windows Defender Firewall in the new window.
- Choose to Turn Windows Defender Firewall on or off from the menu on the left side of the window.
- Turn off Windows Defender Firewall for the network that is causing you problems.
Follow the same procedure for the other antivirus on your computer, Turn off the antivirus or firewall software you have on your computer.
10. Disable IPv6
Sometimes making your computer connect to IPv4 rather than IPv6, can solve the issue with the internet connection. Follow the steps given below to disable IPv6:
- Go to Settings from the Start menu.
- Select Network & Internet from the menu.
- Change adapter options can be found by scrolling down.
- Select Properties from the menu of your active network adapter.
- Scroll down to Internet Protocol Version 6 (TCP/IPv6) in the Properties window and uncheck the box next to it.
- To save the changes, click OK.
- You may need to restart your computer to determine if the remedy works.
11. Check MAC Address
MAC is an abbreviation for Media Access Control. MAC addresses are identifiers that can be used to control device network access. Most routers have a feature that allows you to filter devices based on their MAC addresses.
This feature may have been turned on which is causing this WiFi is connected but no internet error on your computer. Check the list of allowed or deny modes, the selected mode controls whether the MAC address is specified in your router, and only those mentioned in the allowed mode get access.
Any web browser may access your router’s administration dashboard; all you need is the correct IP address. Your router’s default address is normally found at the bottom of the box. If you can’t find it there, you can use the command prompt to obtain it:
- Search cmd in the Start menu and run the Command Prompt as administrator.
- Type ipconfig into the Command Prompt window and hit Enter.
- Navigate to your Default Gateway IP Address, which should be something along the lines of 192.168.X.X.
- To access your router’s control dashboard, type this IP address into your web browser.
- You will be required to log in, so enter the router’s credentials, which are not the same as your WiFi password and username. If you’ve never changed them previously, by default that should be the admin for both username and password,
In the router settings, double-check that the MAC address filtering feature is turned off and that you’re not blocking your device’s access to the internet with a specific filtering rule.
Conclusion
In this article, you will find the best solution for the WiFi Connected But No Internet error. These fixes are pre-tested and safe to use. You can try any one of these to solve the issue on your computer.